Description
The Resmed AirCurve 10 ST is a fixed-pressure BiLevel device with an integrated HumidAir humidifier. The ST model provides clinician-programmed inspiratory and expiratory pressure settings with timed backup rate support.
This configuration includes the AirCurve 10 ST device, integrated HumidAir humidifier, power supply, and standard included accessories. The device is compatible with standard CPAP masks and Air10-series replacement accessories.
NOTE: This item is a factory-new, not refurbished, never used.
Special Features
- ST Mode: Provides BiLevel operation with clinician-programmed IPAP, EPAP, and backup rate settings.
- S Mode: Provides spontaneous BiLevel operation using clinician-programmed inspiratory and expiratory pressure settings.
- CPAP Mode: Allows fixed-pressure operation when prescribed and configured.
- Integrated HumidAir Humidifier: Built into the device and used with compatible Air10 water tubs.
- TiControl Settings: Allows clinician-programmed inspiratory time settings when applicable.
- Easy-Breathe Waveform: Resmed pressure-delivery technology designed to align pressure transitions with the breathing cycle.
- Vsync Leak Management: Adjusts device operation in response to detected leak conditions.
- Ramp Setting: Allows pressure to increase gradually from a lower starting pressure to prescribed settings.
- SmartStart and SmartStop: Allows compatible start/stop operation based on mask use and device settings.
- SD Card Data Storage: Includes SD card support for device data recording.
- Wireless Connectivity: Supports cellular connectivity where available and supported.
- Air10 Accessory Compatibility: Compatible with Air10 filters, water tubs, power supplies, tubing options, and related replacement parts.
In The Box
- (1) Resmed AirCurve 10 ST BiLevel Machine
- (1) Integrated HumidAir Humidifier
- (1) HumidAir Water Tub
- (1) SlimLine Tube (non-heated)
- (1) 90W Power Supply
- (1) Power Cord
- (1) Standard Filter
- (1) Travel Bag
- (1) SD Card, Pre-Installed
- (1) User Guide
Not Included:
- CPAP Mask
- Mask Headgear
Specifications
- Product Type: Fixed-Pressure BiLevel Machine
- Compatibility: Standard CPAP Masks; Air10-Series Tubing, Filters, Water Tubs, Power Supplies, And Compatible Accessories
- Device Modes: ST, S, CPAP
- Humidification: Integrated HumidAir Humidifier
- Pressure Range: 4–25 cmH2O
- Power Supply: 90W
- AC Input Range: 100–240V, 50–60Hz
- Data Storage: SD Card
- Connectivity: Cellular Connectivity Where Available And Supported
- Manufacturer SKU: 37306
- HCPCS Code: E0471
- Prescription Required?: Yes
FAQ
What is the Resmed AirCurve 10 ST?
The Resmed AirCurve 10 ST is a fixed-pressure BiLevel machine with ST, S, and CPAP operating modes. The ST mode supports clinician-programmed IPAP, EPAP, and backup rate settings.
What is the difference between AirCurve 10 ST and AirCurve 10 VAuto?
The AirCurve 10 ST includes a timed backup rate in ST mode. The AirCurve 10 VAuto is an auto-adjusting BiLevel device without the same ST backup rate configuration.
Does the AirCurve 10 ST include HumidAir?
Yes. The AirCurve 10 ST includes an integrated HumidAir humidifier and is used with compatible Air10 water tubs.
Does this AirCurve 10 ST include heated tubing?
This listing includes the AirCurve 10 ST with HumidAir. ClimateLineAir heated tubing is only included if listed in the selected product configuration.
What masks are compatible with the AirCurve 10 ST?
The AirCurve 10 ST is compatible with standard CPAP masks that connect to standard CPAP tubing, including full face, nasal, and nasal pillow mask styles.
What accessories are compatible with the AirCurve 10 ST?
The AirCurve 10 ST is compatible with Air10-series filters, HumidAir water tubs, power supplies, tubing options, SD cards, and related Air10 replacement accessories.
Does the AirCurve 10 ST require a prescription?
Yes. CPAP and BiLevel machines require a valid prescription for purchase.
Is SKU 37306 a new or refurbished AirCurve 10 ST?
SKU 37306 is listed as a new Resmed AirCurve 10 ST with HumidAir when sold under the new product configuration. Refurbished or pre-owned devices should be listed separately.
What is the HCPCS code for the AirCurve 10 ST?
The HCPCS code for the AirCurve 10 ST is E0471.
What is the GTIN for Resmed AirCurve 10 ST SKU 37306?
The GTIN-14 for Resmed SKU 37306 is 00619498373062. The UPC / GTIN-12 is 619498373062.
